If you’re using the Libre 3 plus sensors to track your biodata you’ll need to download the Libre app by Abbott to activate your sensor. Here’s a simple step-by-step guide to help you set it up and start monitoring:
1. Download the App:
2. Create an Account or Log In:
Open the app and follow the prompts to create a new account or log in if you already have created a login (including logins created for the Libre 2 app).
3. Link Libre app & Theia (step 4 of onboarding)
Go to the Theia app and complete step 4 of your onboarding process.
If you have already completed this step previously, your data will already be connected.
4. Prepare for Application (Once your sensor is received)
Choose the right location: The Libre 3 plus sensor is applied to the back of your upper arm.
Clean the area: Use an alcohol wipe to clean and disinfect the application area. Allow it to dry completely.
5. Apply The Sensor
Peel off the packaging: Open up the Libre 3 plus sensor packaging and peel off the protective seal.
Apply the sensor: Press the applicator firmly onto the cleaned area of your arm.
6. Activate the Sensor
Activate the sensor: Open the Libre app and follow the instructions to scan your new sensor. You’ll need to hold your smartphone close to the sensor to start it.
Wait for the warm-up period: The sensor will take about 60 minutes to calibrate before it begins transmitting glucose data.
7. Monitor Your Glucose Levels
Log Activities:Log your activities in Theia to correlate inputs with your body's reactions.
Need Help?
Please contact our support team via the Help button in the bottom right corner of the Theia app or email [email protected]